Why Some AM radio stations have to reduce power or sign off at night:

Most AM radio stations are required by the FCC's rules to reduce their power or cease operating at night in order to avoid interference to other AM stations. Our rules governing the daytime and nighttime operation of AM radio stations are a consequence of the laws of physics. Because of the way in which the relatively long wavelengths (see Footnote 1 <http://www.fcc.gov/mmb/asd/bickel/daytime.html>) of AM radio signals interact with the ionized layers of the ionosphere several miles above the earth's surface, the propagation of AM radio waves changes drastically from daytime to nighttime. This change in AM radio propagation occurs at sunset due to radical shifts occur in the ionospheric layers, which persist throughout the night. During daytime hours when ionospheric reflection does not occur to any great degree, AM signals travel principally by conduction over the surface of the earth. This is known as "groundwave" propagation. Useful daytime AM service is generally limited to a radius of no more than about 100 miles, even for the most powerful stations. However, during nighttime hours the AM signals can travel over hundreds of miles by reflection from the ionosphere, a phenomenon called "skywave" propagation. (Shortwave stations <http://www.fcc.gov/ib/pnd/neg/hf_web/hf.html>, which operate using AM modulation between 2.3 MHz and 26.1 MHz, also use this phenomenon to broadcast still greater distances, up to thousands of miles). Because of this change in signal propagation from daytime to nighttime, if every AM station kept its daytime operating power at night, massive interference would result. (See also Hours of Daytime-Only AM Broadcast Stations, First Report and Order, BC Docket 82-538, 95 FCC 2d 1032 (1983) for a similar description.)

The FCC was established by the Communications Act of 1934, and was given the responsibility of making a "fair, efficient and equitible distribution of radio service" to the various communities of the United States. In order to meet this responsibility, and in recognition of the physical laws which govern AM radio propagation, the FCC established three classes of AM stations, each of which operates on specified frequencies, or channels There have been some changes since then, but the main features of the plan have remained in place. Here is a quick summary of the three types of AM stations:

Clear channels. On these channels, only one station, called the "dominant" station, was permitted to operate during nighttime hours in order to provide service to a wide area. Footnote 2 <http://www.fcc.gov/mmb/asd/bickel/daytime.html>. A typical clear channel station, transmitting with power of 50 kilowatts into an omnidirectional antenna, provides nighttime skywave service to an area approximately 750 miles in radius. Some examples of clear channel stations are WCBS in New York, WGN in Chicago, WHO in Des Moines and KFI in Los Angeles.

Regional channels. On these channels several stations are permitted to operate during nighttime hours, protecting each others' nighttime service areas by use of directional antennas. As the name implies, stations on regional channels provide nighttime service to moderately-sized or "regional" areas.

Local channels. Essentially, all stations on local channels are permitted to operate during nighttime hours with the same facilities as employed during the daytime. The nighttime service of such stations is limited to very small "local" areas by massive interference from the numerous other stations on the channel.

For the most part, the basic structure of the FCC's original frequency plan has remained unchanged over the past several decades. Additional stations gradually have been permitted to operate on the clear channels. However, in order to preserve the wide-area nighttime service provided by the dominant clear channel stations, when nighttime operation is permitted, these stations are required to use directional antennas in order to protect the dominant clear channel station from interference to its nighttime skywave service area. Most of these stations are required to reduce power at night, to avoid causing interference to the dominant stations and to each other. Other stations, which cannot afford the necessary protection at night to other AM stations, are presently licensed to operate during the daytime hours only. (New daytime only stations are no longer being authorized <http://www.fcc.gov/mmb/asd/main/am.html>, since December 1, 1987.)

To find out what daytime and nighttime operations are authorized for your favorite AM broadcast station, you may use our AM Query <http://www.fcc.gov/mmb/asd/amq.html>. The Hours of Operation for this Record field for the station will indicate what hours the station may operate with the listed station parameters, either as Unlimited hours operation, Daytime, or Nighttime. Note that a station may have multiple records, for different daytime and nighttime operations.

 

Footnotes:

 

Footnote 1: <http://www.fcc.gov/mmb/asd/bickel/daytime.html>The wavelengths of AM radio signals vary from a maximum of 556 meters (1825 feet) at 540 kilohertz (kHz), the lowest AM carrier frequency, to a minimum of 176 meters (580 feet) at 1700 kHz, the highest carrier frequency at the upper end of the AM expanded band. In contrast, the wavelengths of FM radio signals are much shorter; i.e., approximately 3 meters (10 feet). Because of their much shorter wavelengths, FM signals are not significantly reflected by the ionosphere.

 

Footnote 2: <http://www.fcc.gov/mmb/asd/bickel/daytime.html> This is somewhat of an oversimplification, in that there are actually two classes of clear channels. On some of the clear channels, there are two dominant stations, which are separated by great distances and which employ directional antennas during nighttime hours in order to protect each other's skywave service areas.
 

The Above Information Can Be Read in Complete Detail at The FCC Web Site www.fcc.gov